Bulbs and sockets

Our collection light bulbs and sockets to design your own light or replace broken bulbs. We sell Cirkit and Euromini's . useable for roundwire system and Cirkit system

Cirkit candle socket (CK1010-16) These sockets are specially designed for the CK1010-5 and CK1010-12 bulbs. You can use these sockets to design you own candlestick, wall lights and chandeliers.Socket : Ca 4,8 mm with 30cm white wire. Left socket on the photo.
1,95 EUR

 

Cirkit candle socket (CK1010-17) These sockets are specially designed for the CK1010-5 and CK1010-12 bulbs. You can use these sockets to design you own candlestick, wall lights and chandeliers.Socket : Ca 11,1 mm with 30cm white wire. Right socket on the photo
1,95 EUR

 

Cirkit 12V GOR Bi-pin bulb (CK1010-5) Bi-pin lightbulb size grain of rize. To fit sockets CK1010-16 and Ck1010-17. wires need to be trimmed to size.
2,15 EUR

 

Cirkit candle tip bi-pin GOR bulb (CK1010-12) Candle tip bi-pin light bulb. Size Grain of rize. To fit the sockets CK1010-16 and Ck1010-17. wires need to be trimmed to size.
2,15 EUR

 

Euromini's candle socket (2) (EM2028) Euromini's candle sockets packed per 2. To design your own light. these are the long (candle) version.
2,10 EUR

 

Euromini's candle socket (2) (EM2027) Euromini's candle socket packed per 2. To design your own light. these are the short version.
2,10 EUR

 

Euromini's GOR bi-pin bulb (2) (EM2025) Euromini's 12 V grain of rize bi-pin light bulb. Wires need to be trimmed to size. 2,5 mm 40mA
0,95 EUR

 

Euromini's candle tip bi-pin bulb (2) (EM2023) Euromini's 12 V grain of rize bi-pin candle tip light bulb. Wires need to be trimmed to size. 2,5 mm 40mA
0,95 EUR

 

Euromini's micro bi-pin light bulb (EM2024) Euromini's 12 V grain of rize bi-pin light bulb. Wires need to be trimmed to size. 2 mm 40mA
1,10 EUR

 

Cirkit screw-base bulb socket (CK1010-8A) Cirkit screw-base bulb socket, with white wire. This socket is made for use with the CK1010-7 bulbs.
1,25 EUR

 

Cirkit screw-base bulbs (CK1010-7) Cirkit Screw-Base Bulbs to fit the CK1010-8a socket. 12 V 90mA
1,25 EUR

 

Euromini's Euromini's screw-base bulbs (4) (EM2214) Euromini's screw-base bulbs packed per 4 to be used in the EM2215 socket.
2,10 EUR

 

Cirkit GOR lightbulb with wire (CK1010-20) Lightbulb Grain of rice 12Volt 50mA with 30 centimeter brown wire
2,25 EUR

 

Cirkit fluorette bulb socket (CK1019) These sockets are designed specifically for the CK1018 series of fluorette bulbs. The CK1019 is equipped with imbedded nails which automatically make electrical contact with the tape run when pounded in.
2,95 EUR

 

Cirkit fluorette bulb socket (CK1019-1) These sockets are designed specifically for the CK1018 series of fluorette bulbs. The CK1019-1 has solder eyes for the connection and soldering of wires at each end. Sockets measure approximately 3/16" wide by 1-5/8" long.
2,50 EUR

 

Cirkit clear fluorette bulb (Ck1018-1) Ideal for back lighting or illuminating miniatures, these fluorescent shaped bulbs provide a unique and effective indirect lighting source. 70 to 80 ma when connected across a 12-volt source. Mate with CK1019 and CK1019-1 sockets. 2,500 hour bulb life.
2,10 EUR

 

1 2

Continue